+86-769-81088369Amy@dgtyawards.com

Categories

Dongguan City Taiyao Hardware Products Co.,Ltd
Add:Dongshan Industrial City, South Side, Xiegang Town, Dongguan, Guangdong
Contact: Amy mao
TEL:  +86-769-81088369
Mobile:+86-13316684260
E-mail:taiyao@dgtyawards.com
Web:www.dgtyawards.com

Home > News > Content

2D Sports Metal Medal Production Process Principle

2D Sports Metal Medal production process principle
Molds according to the processing of metal processing technology classification, commonly used are: stamping die, including punching die, bending die, drawing die, hole mold, shrinkage mold, ups and downs, bulging mold, plastic mold, Including forging forging die, upsetting die, etc .; and extrusion die and die casting mold. In the 2D Sports Metal Medal production process, photographic etching technology. The surface of the 2D Sports Metal Medal is uniformly and uniformly formed into a layered photosensitive resin film, and is exposed to ultraviolet rays or the like by the original film, and then subjected to a development process to form a coating layer of a drug-resistant coating , And then etching the acid or lye of the bath, the exposed part of the chemical or electrochemical erosion, to dissolve 2D Sports Metal Medal processing technology.
2D Sports Metal Medal is also commonly used in the production of an alloy trophy process, the principle is the etching process. The so-called etching technology, is the use of metal surface erosion, removal of metal from the metal surface treatment technology.
Molds according to the processing of metal processing technology classification, commonly used are: stamping die, including punching die, bending die, drawing die, hole mold, shrinkage mold, ups and downs, bulging mold, plastic mold, Including forging forging die, upsetting die, etc .; and extrusion die and die casting mold.
The surface of the 2D Sports Metal Medal is uniformly and uniformly formed into a layered photosensitive resin film, and is exposed to ultraviolet rays or the like by the original film, and then subjected to a development process to form a coating layer of a drug-resistant coating , And then etching the acid or lye of the bath, the exposed part of the chemical or electrochemical erosion, to dissolve 2D Sports Metal Medal processing technology.
Metal medals, belonging to a medal (medal) in a general, mainly by the stamping, die-casting, biting and other processes made of medals can be gold plating surface, gold, silver, nickel and other plating effect. Its lines are simple and smooth, the pattern of bumps and other characteristics can be used paint, enamel, printing and other surface color technology to make products more abundant. Gold and silver medals are the most expensive, followed by bronze medals, zinc alloy medals, iron medals the cheapest.
A metal medal customization there is a different meaning, so we should be a good collection, but the medals have faded that day, then we should be how to maintain metal medals, so that it was as fresh as it was? Let's take a look at it: Use some harmful chemicals that prevent contact with metals, such as acids, oils, chlorides, and the like. To treat the dust on the medal, use a clean and soft piece of cloth to wipe, and those who need special care of the corner details, use a soft brush to brush or use a vacuum cleaner to suck or blow dust. Metal medals placed for too long after the environment according to the placement of more or less there will be some dull phenomenon, this time you can use cotton cloth fine cloth gently wipe back and forth, can achieve the effect of polishing. The metal medal place must be kept dry, free of dust and air pollutants.
 One, do not behind closed doors. Many designers in the design of 2D Sports Metal Medal only consider the design draft on the beautiful, do not consider the process, and ultimately lead to no production.
Second, do not patchwork. Some designers will also refer to some kind of design, but still need to avoid cross-industry, cross-regional patchwork, to consider the cooperation of the production capacity of manufacturers.
The so-called cross-industry, is to use the A industry technology to do B industry stuff. We list a clear customer case: there was a customer, see a bag above the brand logo logo is more beautiful, so the requirements of the trademark in accordance with the style of the production of 2D Sports Metal Medal. Period there is a problem, the bags of the trademark is often tens of thousands of production, and customers require the production of 2D Sports Metal Medal only a few dozen, timely real production, the unit cost can not be ignored. Luggage trademark material and technology and the requirements of 2D Sports Metal Medal material is different, the production equipment required is also different, interlaced, such as Geshan, perhaps a little difference is a world of difference. Can not just look at the appearance.
Third, consider the 2D Sports Metal Medal production costs and demand effectiveness.
The so-called cross-regional, also cited in a row, a customer from abroad to bring back a 2D Sports Metal Medal, and then asked the designer in accordance with the 2D Sports Metal Medal to produce. The results can be imagined.